Dear TI Team
Kindly share the best layout and schematic guidelines for this IC's typical use case as an Isolated CAN traceiver, as would yield the best performance with regards to conducted emissions from 150KHz to 30MHz
Thanks, Regards
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear TI Team
Kindly share the best layout and schematic guidelines for this IC's typical use case as an Isolated CAN traceiver, as would yield the best performance with regards to conducted emissions from 150KHz to 30MHz
Thanks, Regards
Hi Dhruv,
Please follow the schematic & layout guidelines mentioned in sections 9.1 Application Information and 11.1 in the datasheet ISO1044 Isolated CAN FD Transceiver in Small Package datasheet (Rev. A) (ti.com)
Also, you can refer to our technical article (1) Reduce emissions and drive up immunity in your isolated CAN systems - Analog - Technical articles - TI E2E support forums for more information on reducing conducted emissions.
Please let me know if you have any questions.
Thanks
Vikas J