• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 15 subscribers
  • Views 278 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

[FAQ] How do you generate isolated power for a digital isolator?

ISOW7740: Is this connect configuration possible?

R.Fukunaga
Expert 1375 points
Part Number: ISOW7740
Other Parts Discussed in Thread: THVD1424, ISOW1432, ISOW7741, SN6501

Hi all.

I would like to drive RS-485 with DCDC of the digital Isolator.

Is it possible with the following configuration?

I think it is possible if THVD1424 can be powered by the secondary side power as follwing.

I thought I use ISOW1432, but I want to switch terminal resistor, so I am thinking of using THVD1424.

Please let me know if you have any other recommend configurations.

Best Regards,

Ryusuke

  • +1
    TI__Mastermind 18995 points

    Hello Ryusuke, 

    ISOW7741 can be used power another logic device. There shouldn't be an issue to use ISOW7741 as a method of power and isolation for a discrete RS-485 transceiver. 

    The SN6501 and transformer driver family is another option if a larger amount of isolated power is needed.