ISO7041-Q1: ISO7041-Q1

Arabella Zhang

Intellectual 1770 points

Part Number: ISO7041-Q1

Tool/software:

Dears,

I want to know what the difference is between the two material numbers below.

Many thanks!

2 months ago

0 Aaditya V. 2 months ago

TI__Genius 12455 points

Hello,

Thank you for reaching out.

The main difference between the two part numbers is the "F" letter. The "F" letter indicates the default state of the device. The ‘F’ suffix of our digital isolator devices denotes the default output state of the device. In the event of input power or signal loss, the default output is HIGH for devices without suffix F and LOW for devices with suffix F. Please check this FAQ for more information: [FAQ] What is the difference between ISOxxxxF and ISOxxxx devices (Ex. ISO7741 vs. ISO7741F)?

Regards,
Aaditya V.

0 Arabella Zhang 2 months ago in reply to Aaditya V.

TI__Intellectual 1770 points

Thanks for your reply. 1. Could you please help customer review the schematic diagram.

2. Can VCC_COM_5 only provide 1mA?

Many thanks!

0 Aaditya V. 2 months ago in reply to Arabella Zhang

TI__Genius 12455 points

Hello,

Thanks for your reply.

Feel free to send the schematic on E2E.

Arabella Zhang said:
Can VCC_COM_5 only provide 1mA?

I am not sure what you mean by this, can you please explain? Is VCC_COM_5 a pin that you are referring to?

Regards,
Aaditya Vittal

Isolation

Isolation forum

ISO7041-Q1: ISO7041-Q1