• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 429 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

D Flip Flop Current Draw

William Cox69525
Prodigy 10 points
Other Parts Discussed in Thread: SN74AUP1G79

I am building a 128 cell shift register using the SN74AUP1G79 chip. I don't understand the current ratings on the spec sheet for this part. How much current will each flip flop draw when used in a shift register? Thank you!

  • 0
    TI__Expert 6330 points
    Hello,

    The parameter Icc is the static power that device will draw. In the electrical characteristics section of the datasheet, the Icc parameter can be found as 0.9uA max across temperature.

    Please note that we are trying to ensure that all posts are answered. With any new posts, we will be sure answer in a timely manner so that no posts go without a response. We will be closing this thread due to its age.
    Please feel free to post a new thread if you have additional questions, and we would be very happy to help.
    Best,
    Aaron Goodson