• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 228 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

14-24-LOGIC-EVM: Board thickness

Jonathan Navor
Expert 7805 points
Part Number: 14-24-LOGIC-EVM

Hi Guys,

Could you help us share the board thickness for the 14-24-LOGIC-EVM. Our customer is trying to package this device and they are trying to mount this board on test plate but they need it's thickness to start looking at different standoff or different ways how to mount it. I could not find any information from our end. 

Thank you in advance for the support. 

Best regards,

Jonathan

  • +1
    TI__Mastermind 23373 points

    Hey Jonathan, 

    The board is a standard two layer board that is ~1.60mm thick. I'm sure there could just squeeze some standoffs in there if they're looking to drill holes through but they may be better off with sticky bumpons instead of standoffs. .

    Thanks!
    Rami