• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 222 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

SN74LVC1G07: Connecting NC to GND

SN74LVC1G07: Connection of NC pin for Aerospace application

Cedrick
Expert 8270 points
Part Number: SN74LVC1G07

Hi,

Good day.

Our customer wants to know what's the recommended connection for the NC pin and I have shared this E2E post.

Now, they want to know if it is recommended to solder straight to GND or through a resistor? This is for aerospace purpose so no pins can be unconnected without evidence on why.

Thank you.

Regards,

Cedrick