SN74LV132A: Interleaved flash

Danilo A.

Mastermind 24715 points

Part Number: SN74LV132A

Hi Team,

Our customer would like to know the meaning of "interleaved flash" mentioned at package information of SN74LV132APWR.

Regards,

Danilo

over 2 years ago

0 Emrys Maier over 2 years ago

TI__Guru* 96591 points

Hi Danilo,

I didn't see that term in the datasheet. Can you send me a link or screenshot of the place where this was seen?

0 Danilo A. over 2 years ago in reply to Emrys Maier

TI__Mastermind 24715 points

Hi Emrys,

I just received a response from our customer that he is pertaining to interlead flash, not interleaved flash, mentioned at page 19 of the datasheet. Sorry for the confusion. Kindly refer to the screenshot below. Which part of the IC is the interlead flash?

Regards,

Danilo

0 Emrys Maier over 2 years ago in reply to Danilo A.

TI__Guru* 96591 points

Interlead (not interleaved) flash is defined by JEDEC in policy SPP-014 as "Opaque mold compound material attached to an area between adjacent leads remaining after dambar trim operations"

Basically, it's some plastic that can poke out of the body of the device by a small amount between the leads.

Logic

Logic forum

SN74LV132A: Interleaved flash