We would like our board design reviewed but in order to move forward, we would like to sign an NDA with you. Kindly send us a contact email so that we can proceed with the same.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Unfortunately, this won't be possible. If its possible to only get a screenshot of the specific device, I can review. However, in the end we are only going to provided generic tips PCB like placing bypass caps close to the device and maintaining 45 degree on turns if possible. These are just some common high speed routing techniques.
https://www.proto-electronics.com/blog/top-10-pcb-routing-tips this article has some good tips to reference.