SN74AUP1G126: Incorrect pspice model?

Paulo Monteiro

Part Number: SN74AUP1G126
Other Parts Discussed in Thread: SN74AUP1G125

I am currently using the pspice models for SN74AUP1G125 and SN74AUP126 downloaded from the TI site. The output Y in my TINA pspice simulation is never in high impedance. state. Is this normal? Can you send me corrected pspice models?

[Schematic].pdf [Waveforms].pdf

over 4 years ago

+1 Emrys Maier over 4 years ago

TI__Guru* 97046 points

Hi Paulo,

I've asked our modelling expert to look into this and get back to you.

0 Karan Kotadia over 4 years ago in reply to Emrys Maier

TI__Genius 16735 points

Hi Paulo,

I believe it should work now.

SN74AUP1G126.cir SN74AUP1G125.cir

SN74AUP1G126.lib SN74AUP1G125.lib

Regards,

Karan

0 Paulo Monteiro over 4 years ago in reply to Karan Kotadia

Prodigy 30 points

Many thanks, these models did work! Paulo

Logic

Logic forum

SN74AUP1G126: Incorrect pspice model?