Hello,
We use SN74AHCT1G125 on several of our boards. We are seeing a short between pins 3 and 4. Have you seen this before? What could cause this?
Eric K.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
We use SN74AHCT1G125 on several of our boards. We are seeing a short between pins 3 and 4. Have you seen this before? What could cause this?
Eric K.
Hi Eric,
Can you give a little bit information? A schematic of your circuit and some oscilloscope shots of the mentioned behavior will help.
Hi Eric,
One possible issue is damage to the ESD diode between the output and GND could cause a short to ground.