Hi team,
Our customer want to know recommend size of below.
・Land size
・Solder resist opening size
・Metalmask size
Do you have some data?
Best regards,
teritama
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Teritama,
All of our datasheets have packaging guidelines and dimensions at the end. For the NS package this is shown on page 26 of the datasheet:
Hello teritama,
Please see this post for some details: https://e2e.ti.com/support/logic-group/logic/f/logic-forum/1057160/sn74ls06-about-the-dimensions-of-sn74ls06?tisearch=e2e-sitesearch&keymatch=SN74LS06#
If you need a footprint for the package, I would recommend using the Ultralibrarian to create it:
From the product folder: https://www.ti.com/product/SN74LS06
Select "Design & development"
Then "CAD/CAE symbols"
For your package, click on "view options"
This will take you to the Ultralibrarian where you can select details regarding what you need.