• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 21 subscribers
  • Views 467 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AHC595: Vik Spec Consult

Stanley Dai
Expert 5810 points

Part Number: SN74AHC595

Hi Team,

Customer is consulting the exact value of Vik. Pls help us here. Thanks.

Best,

Stanley

  • +1
    TI__Mastermind 22480 points

    Hi Stanley,

    This is a CMOS device so VIK does not apply to this device. This device does have input clamp diodes that cannot exceed -20mA before damage can occur to the device. The typical input voltage VI with -20mA IIK (Input clamp current) is about -3.2V.  

    Regards,

    Sebastian