LSF0102: Why there have R and C on the Vref_B and EN pins in the LSF0102 typical application

Randy Chen

Part Number: LSF0102

Hi,

Why Both of Vref_B pin and Enable pin connected to power rail with RC in the reference design? Is it for power sequence requirement?

Best regards,

Randy

over 3 years ago

0 Dylan Hubbard over 3 years ago

TI__Mastermind 45725 points

Hi Randy,

This is covered in Video 2 of this training series on the LSF family, I recommend watching every video in this series to best implement these devices.

Logic

Logic forum

LSF0102: Why there have R and C on the Vref_B and EN pins in the LSF0102 typical application