SN74LVC1G175: Searching TI solution

Kygo Cheng

Expert 6830 points

Part Number: SN74LVC1G175
Other Parts Discussed in Thread: SN74LVC2G74-Q1

Hi Team,

There is a good new that we could DIN TI product!

Customer is looking for the replacement of NXP 74LVC1G175-Q100 SOT-363 (P2P would be better )

1. Please help suggest TI solution, THX

2.SN74LVC1G175 is a good solution?

3.Please help provide comparison table , I will propose to customer ,THX

over 2 years ago

0 Clemens Ladisch over 2 years ago

Guru 292420 points

The exact part number you want to replace is 74LVC1G175GW-Q100H.

ti.com/cross-reference-search/en-us suggests the SN74LVC1G175‍DCKR. But there is no automotive-qualified '175 device.

+1 Sebastian Muriel over 2 years ago in reply to Clemens Ladisch

TI__Genius 16240 points

Hi Kygo,

As Clemens stated, our direct replacement is the SN74LVC1G17DCKR but it is not automotive qualified. My next recommendation would be to use the SN74LVC2G74-Q1.

Regards,

Sebastian

0 Kygo Cheng over 2 years ago in reply to Sebastian Muriel

TI__Expert 6830 points

Hi Sebastian Muriel

Please help provide comparison table "SN74LVC2G74-Q1. vs. 74LVC1G175GW-Q100H", I will propose to customer ,THX

0 Sebastian Muriel over 2 years ago in reply to Kygo Cheng

TI__Genius 16240 points

Hi Kygo,

The SN74LVC2G74-Q1 is an 8 pin positive edge triggered D flip flop with Clear and preset offered in the DCU package.

The recommended operating conditions of these devices are the same and the electrical characteristics are very similar.

Below are some of the differences of the electrical characteristics.

		74LVC1G175GW-Q100H	LVC2G74-Q1
Input Leakage Current	Vcc = 0 to 5V, Vi = 5.5V or GND	+/- 1uA	+/- 5uA
Ioff	Vcc = 0V, Vo = 5.5 V	+/- 2uA	+/- 10uA
Icc	Vcc= 1.65 to 5.5V	4uA	10uA

The function tables below show how these devices operate differently.

SN74LVC2G74-Q1

74LVC1G175GW-Q100H

Regards,

Sebastian

Logic

Logic forum

SN74LVC1G175: Searching TI solution