ULPI Interface Levelshifter

Katharina Berberich

Intellectual 2015 points

Other Parts Discussed in Thread: TUSB1210

Hi,

is there a solution to levelshift an ULPI Interface like the TUSB1210 has from 1,8V to 3,3V f.e.

thanks and best regards,

Katharina

over 14 years ago

0 Katharina Berberich over 14 years ago

TI__Intellectual 2015 points

Hatti,

somehow your answer got lost in the forum.

Here is a description of the interface:

60MHz synchron signals, 12 signals, 8 of these bidirectional. Delay should be min 1.5nsec.

best regards,

Katharina

0 Emrys Maier over 8 years ago in reply to Katharina Berberich

TI__Guru* 97106 points

Hi,

We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.

Regards,
Emrys

Logic

Logic forum

ULPI Interface Levelshifter