SN74HCT08: What is the mold marking means?

Wong Sam

Part Number: SN74HCT08

Below two different type of mold marks on the bottom of the parts are from one reel.
Anybody knows what is these numbers means? Why different mold marking parts can be in one reel? Thanks!

over 3 years ago

0 Sebastian Muriel over 3 years ago

TI__Mastermind 18140 points

Hi Wong,

Were these devices ordered from TI's website or an authorized distributor?

Regards,

Sebastian

0 Wong Sam over 3 years ago in reply to Sebastian Muriel

Prodigy 90 points

Hi Sebastian,

From TI's website.

Thanks.

Sam

0 Sebastian Muriel over 3 years ago in reply to Wong Sam

TI__Mastermind 18140 points

Hi Sam,

Can you please provide the shipping label?

Regards,

Sebastian

0 Wong Sam over 3 years ago in reply to Sebastian Muriel

Prodigy 90 points

Hi Sebastian,

COC ok? Pls see below. Tks.

BR,

Sam

0 Sebastian Muriel over 3 years ago in reply to Wong Sam

TI__Mastermind 18140 points

Hi Sam,

These bottom side markings are put there by the manufacturer so we don't regulate these markings.They were ordered from TI website so there should be no concern here, these markings don't affect operation of the device.

Regards,

Sebastian

Logic

Logic forum

SN74HCT08: What is the mold marking means?