SN74AHC1G00QDCKRQ1 IBIS model

Rak

Intellectual 505 points

Other Parts Discussed in Thread: SN74AHC1G00

Hi,

I was looking for IBIS model of SN74AHC1G00QDCKRQ1, but I couldn't find it.

On the other hand, I found that of SN74AHC1G00, non-Q1, in the following web page.

http://focus.ti.com/docs/prod/folders/print/sn74ahc1g00.html

Is the IBIS of standard part applicable for Q1 part too ?

Thank you in advance for your help.

Best regards,

Rak

over 14 years ago

0 Robert Regojo over 14 years ago

TI__Intellectual 1020 points

Hello Rak,

Yes, that IBIS model should work just fine under the SN74AHC1G00 stated temperature range. The only difference is the Q1 model is spec'd for automotive applications and thus has greater temperature range capabilities. As long as it's run within the non-Q1's spec you'll be fine.

Regards,

Robert Regojo.

0 Rak over 14 years ago in reply to Robert Regojo

Intellectual 505 points

Robert,

Thank you for your reply.

SInce I need to care about higher temp (~125 C), I would like to get IBIS model that covers for -40~125 C.

Do you know if it is available and where I can get it ?

Best regards,

0 Gregg Scott over 14 years ago in reply to Rak

TI__Mastermind 44855 points

Rak,

An IBIS model for the Q1 device does not exist. The existing model for the standard device is set for a max temperature of 85C.

Logic

Logic forum

SN74AHC1G00QDCKRQ1 IBIS model