I understood the output pulse width is determined by the bellow equation.
tw = K * R * C
But I don't know how to determine the 'K' value for a monostable multivibrator.
It is written at Figure4-2 of application manual (show below URL).
But It is not described the 'K' value with the 10uF capacitor which I will use with 430k resistor at Vcc5V.
Designing With the SN74LVC1G123 Monostable Multivibrator (Rev. A)
Please let me show about it.
Thank you.
Best regards,
Keisuke Wakayama
