Initial output of a D-Flipflop?

Martin Fuchs

Other Parts Discussed in Thread: SN74LVC1G374

Hello!

Is the initial output Q (Hi/Lo) after power-up of the SN74LVC1G374 predictable? I could not find this info in the datasheet.

(Of course, I read the part of pulling the /OE up for a safe power-up. But that is all information I could find)

Regards,

Martin Fuchs

0 Chris Cockrill over 14 years ago

Hi Martin

The output after power up is unpredictable. It will only be predictable after first valid clock.

0 Martin Fuchs over 14 years ago in reply to Chris Cockrill

OK, that is not really what I wanted to hear ;-), but it is what I wanted to know.

Thank you!

Logic forum