SN74AVCBH164245: IO specification for one channel or for all channels?

Ella KIM

Part Number: SN74AVCBH164245

Hello,

I'm wondering if the IO and IOK in absolute maximum rating table are for one channel or for all sixteen channels. Can you help clarify?

I believe IOH and IOL specification are valid per channel. Is my understanding correct?

Thank you,

Ella

over 1 year ago

+1 Clemens Ladisch over 1 year ago

Guru 257000 points

All these specifications are per pin. (The V_CC/GND specifications implicitly apply to multiple I/Os, but they can be measured at the V_CC/GND pins.)

0 Ella KIM over 1 year ago in reply to Clemens Ladisch

TI__Expert 3862 points

Hi Clemens,

Thank you for confirmation. What I understand is : one channel would be damaged with >50mA current thru that channel, and the total device would be damaged with >100mA current thru VCC supply pin with any channel combinations.

May I additionally know what IOK output clamp current is?

+1 Clemens Ladisch over 1 year ago in reply to Ella KIM

Guru 257000 points

Correct.

When an output pin is forced to a negative voltage, I_OK is the current that flows into the GND pin, through the diode, and out of the output pin.

Logic

Logic forum

SN74AVCBH164245: IO specification for one channel or for all channels?