SN74LVC1G125-Q1: Iq current requirement

Scarlett Cao

Part Number: SN74LVC1G125-Q1

Hi team,

Customer needs to use SN74LVC1G125-Q1 in sleep mode and cares about the Icc current at different cases. Could you pls share input Icc current for below scenario?

OE	IC output status	Load	Icc current?
LOW	LOW	Floating
LOW	High
High	Low
High	High

Thanks

Scarlett

over 1 year ago

0 Clemens Ladisch over 1 year ago

Guru 257450 points

I_CC is specified in section 6.5 of the datasheet. (This is a leakage current; at normal temperatures, it will be much smaller than the worst-case limit.)

0 Scarlett Cao over 1 year ago in reply to Clemens Ladisch

TI__Expert 3470 points

Hi Clemens,

Thanks for your reply. The datasheet condition is when Io=0, so the result is not depending on /OE and output status? Thanks

Scarlett

+1 Clemens Ladisch over 1 year ago in reply to Scarlett Cao

Guru 257450 points

I_CC is defined as the current that flows into V_CC and out of GND. So it is independent from the load current.

Logic

Logic forum

SN74LVC1G125-Q1: Iq current requirement