• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 20 subscribers
  • Views 257 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0104E: TXS0104EYZTR

Manikandan Ramasamy
Prodigy 140 points
Part Number: TXS0104E

Hi Team, 

For the part number TXS0104EYZTR, having issue over the pin1 marking.

CAD model show the pin1 marking the at the ball A1 but the datasheet showing the A3 is Pin1.

Attached the images for your reference.

Kindly address the issue.

Regards,
Manikandan Ramasamy.

  • 0
    TI__Guru 50616 points

    Hi Manikandan,

    Please see below as the same pin is numbered as A3 below. Also see page 33 showing only the pin numbers, with the index at A3. However, the pin 1 marking is at the corner of the pin named A1 I/O similar to the CAD, thanks.

    Best Regards,

    Michael.