SN74HCT74: Regarding thermal information

Daisuke Higa

Part Number: SN74HCT74

Hi support team.

The thermal information, which is the contents of the datasheet revision change (F->G), has not been changed.
When will it be fixed?

Best regards,

Higa

over 2 years ago

0 Emrys Maier over 2 years ago

TI__Guru* 97066 points

Hello Higa-san,

Thanks for identifying this error in the datasheet. Typically this type of error will take 3 to 6 months to be fixed, however I cannot make any guarantees regarding a timeline. Are you currently using this device in an application in which the thermal values will impact the application?

0 Daisuke Higa over 2 years ago in reply to Emrys Maier

Genius 4465 points

Hi Maier-san

Thank you for your reply.

Changing the value does not have a direct impact on your application.
Especially in Japan, if there is a change in a part used in a mass-produced application, it may be necessary to present the correct datasheet in accordance with the contract regarding the delivery of the part.
This time I posted it because there was an urgent correction request from our customer.

Best regards,

Higa

0 Emrys Maier over 2 years ago in reply to Daisuke Higa

TI__Guru* 97066 points

Hello Higa-san,

Thank you for the clarification. I will ask my team to prioritize this fix.

0 Daisuke Higa over 2 years ago in reply to Emrys Maier

Genius 4465 points

Maier-san

Thank you for your kind support.

Best regards,

Higa

Logic

Logic forum

SN74HCT74: Regarding thermal information