• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 208 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AHC00: SN74AHC00

sharmila Devi
Prodigy 40 points
Part Number: SN74AHC00

Per Material Declaration , The Bond wire is copper, Need a Copper wire Qualification Test Report (Test performed on WIre bond , Wire Shear test) per AEC , but when i ask a Query i get a SGS Report, but that report doesnt specify anywhere about the Wire Shear, die wire. Can you please clarify this statement and provide the document for Copper wire testing Report.

  • 0
    TI__Guru* 96862 points

    Hello,

    It is my understanding that the AEC (ie the Automotive Electronics Council) specifies requirements for automotive grade parts. The part you have posted under is commercial grade -- I'm a bit confused on why the AEC would be requiring anything for non-automotive parts. I'm also not an expert with qualification or construction of devices.

    The engineers on E2E are experts with the operation and usage of their particular devices (for example, I am an expert with analog logic ICs), but they are not in any way related to the qualification or physical construction of our devices. If you need help using a device, this is the right place. Otherwise, I would recommend going to the CSC.

    I would recommend to send questions like this (ie questions regarding construction or qualification of a device) to the customer support center here: 

    https://ticsc.service-now.com/csm