This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Technocrats,
The following buffer is used from PHY to iDRAC.
Currently, TI-SN74AUC1G125DCKR is being used as the main source without any issues.
I would like to inquire if TI-SN74AUP1G125DCKR is also suitable for this application, and if there are any specific considerations for this application (e.g., rising and falling time).
Thanks
Thanks for your reply.I want to ask a few questions. According to the table,
1. SN74AUP1G125DCKR may not meet the 125MHz specification (Vcc is 1.8V)?
2. We only need a single buffer. Is there any suggestion that meets the specification of 125MHz and has the same package as SN74AUC1G125DCKR?
Thanks!
1. Yes, 80 MHz is less than 125 MHz.
2. At 1.8 V, there is no alternative to the AUC buffer.