SN74LVC1G175: Frequency divider. half

Hideki Hayashi1

Genius 10090 points

Part Number: SN74LVC1G175
Other Parts Discussed in Thread: SN74LVC1G374, SN74LVC1G79, SN74LVC1G80

Hi team,

Are below devices able to work as frequency divider (Fclk -> 1/2Fclk)

>SN74LVC1G175

>SN74LVC1G374

>SN74LVC1G79

>SN74LVC1G80

Best regards,

Hayashi

over 3 years ago

0 Clemens Ladisch over 3 years ago

Guru 325940 points

You need an inverted output, /Q. Only the SN74LVC1G80 has /Q.

0 Hideki Hayashi1 over 3 years ago in reply to Clemens Ladisch

TI__Genius 10090 points

Hi Clemens,

I saw SN74LVC1G80 datasheet and find right application at 9.1.

When customer doesn't connect MCU GPIO, what happens on initialization?

Regards,

Hayashi

0 Jack Campbell over 3 years ago in reply to Hideki Hayashi1

TI__Expert 3170 points

Hi Hayashi,

Initialization from a microcontroller is not necessary, however the flip flop will start up in an undermined state either outputting high or low. This is a property of flip flops and latches.

Please see this FAQ for more information on this.

Logic

Logic forum

SN74LVC1G175: Frequency divider. half