Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 222 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74AVC4T234: Can u please Verify SN74AVC4T234 Schematic Implementation attached in description page

Pasupuleti Ganesh
Prodigy 30 points
Part Number: SN74AVC4T234
Other Parts Discussed in Thread: SN74AUC17, SN74AUC125, SN74AUC34

Hi Team,

    Can u please Verify the attached Schematic & provide me the Improvements.

   Currently we are using it for 100 MHz Clock..In datasheet recommended 26 ohm series resistors on A-Side outputs,Does series resistor needed?

 

With regards,

Ganesh.P

  • 0
    Guru 283200 points

    The datasheet does not recommend that you add series resistors. The remark in section 1 says that the device already has internal series resistors.

    The schematic looks OK. But both supply voltages are the same; why are you using a translator? A simple buffer like the SN74AUC34/​SN74AUC17/​SN74AUC125 would be cheaper and faster.