Other Parts Discussed in Thread: SN74LVC3G34
Dear Team,
My self Murari Divya from Medha Servo Drives pvt.ltd, Hyderabad.
We are using SN74ALVC14 - HEX SCHMITT-TRIGGER INVERTER in our application. It having total 6 inverters but we are using only 4 inverters remaining 2 are not using.
In datasheet it was mentioned that "All unused inputs of the device must be held at VCC or GND to ensure proper device operation."
We are grounded the unused input pins but still we facing problem in our application and it was getting okay when we are ground the unused output pins also.
Please check and tell me the recommendation circuit. Reasons for this kind of problems like noise or mat be floating voltage.