• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 18 subscribers
  • Views 198 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXU0102: Can TXU0102 be used as I2C bus switch?

Koyo Asaishi
Intellectual 1810 points
Part Number: TXU0102
Other Parts Discussed in Thread: TCA9511A, LSF0102, TCA9406, PCA9306, SN74LVC2G66, TXS0102, TCA9803

Hi team,

I'd like to know if VCCA and VCCB of TXU0102 can be same voltage and this device can be used as ON/OFF switch for I2C.
Let me know if there is other appropriate device.

Best regards
koyo

  • +1
    Guru 282290 points

    I²C requires open-drain signals. But TXU devices have buffered push/pull outputs, so they cannot be used for I²C.

    The simplest way to switch I²C signals is to use an actual switch like the SN74LVC2G66. You could also use any I²C translator or buffer that supports equal I/O voltages on both sides, e.g., LSF0102/PCA9306, TXS0102/TCA9406, TCA9803. For hot-plugging, there is the TCA9511A.