SN74LVC1G57: SN74LVC1G57

yenwu lo

Part Number: SN74LVC1G57

Dear Technical Support: Good day,
We plan to use several of your IC devices, Please see attached EXCEL file,

We hope to know the following information regarding the fabrication of related ICs, Specifically, the technology nodes used for fabrication of these ICs

Thanks.

yenwu lo

The_technology_nodes_used_for_fabrication_of_the_ICs_made_by_Texas_Instruments_2.xlsx

over 1 year ago

0 Albert Xu1 over 1 year ago

TI__Mastermind 37935 points

Hi Yenwu,

I took a quick look at the Excel sheet, and none of our devices will be within the nanometer range. Our devices will range from 150 mm - 300 mm.

0 yenwu lo over 1 year ago in reply to Albert Xu1

Prodigy 160 points

Thanks. Albert, Not sure if you know their manufacturing site?

yenwu lo

0 yenwu lo over 1 year ago in reply to yenwu lo

Prodigy 160 points

Hi, Albert, Not sure if these logic devices manufacturing locations or countries are available online or not?

if so? I will be glad to check myself.

Thanks

yenwu lo

0 Albert Xu1 over 1 year ago in reply to yenwu lo

TI__Mastermind 37935 points

Hi Yenwu,

Apologies for the delay, today is a US holiday, so we have delayed responses for all questions.

I will send you the list for the manufacturing sites tomorrow (2/20)

0 Albert Xu1 over 1 year ago in reply to yenwu lo

TI__Mastermind 37935 points

Hi Yenwu,

I have looked into this a bit more, however, this is a bit tricky to answer.

Almost all of these devices will have multiple A/T and Fab sites, and some of them are in China. There is no way to know for certain where the device you order will be manufactured unless you order the EP/SEP devices.

Logic

Logic forum

SN74LVC1G57: SN74LVC1G57