Team,
Could you please share with me the SN74AUP1G126DS's 3D file?Thanks!
Regards,
Qiang
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Team,
Could you please share with me the SN74AUP1G126DS's 3D file?Thanks!
Regards,
Qiang
Hi Qiang,
The 3D model file is attached. Let me know if there are any issues.
Best,
Malcolm
Malcolm,
1. Currently my customer thick stencil is 0.1mm, the D/S requires 0.09mm, is it acceptable to keep customer thick stencil spec?
2. Can you review the below customer lib symbol if it's correct:
3. Could you send me a real picture of the device. from the Top, from the bottom, from the side.
Best regards,
Qiang
Hi Qiang,
1. This should be fine. See here: Designing and Manufacturing with TI's X2SON Packages
2. Yes, that library file looks correct.
3. We don't have any of these devices on hand, so I cannot send a picture.
Best,
Malcolm