• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 18 subscribers
  • Views 115 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LV245AT: For LPC interface

Hailiang Zhang
Expert 5725 points
Part Number: SN74LV245AT
Other Parts Discussed in Thread: SN74CB3Q3245

Hi Team,

Could you pls check does SN74LV245AT work normal for LPC interfance? May customer use SN74CB3Q3245PWR on their borad, but the rising and falling edges of the CLK signal are too slow. Therefore, there is a need to find an alternative to P2P.

Regards,
Hailiang

  • 0
    Guru 263860 points

    The four AD signals are bidirectional, and there is no direction control signal. It is not possible to buffer the LPC signals.

    The SN74CB3Q3245 has an analog bandwidth of 500 MHz. What is the clock frequency?