• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 19 subscribers
  • Views 421 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN74LVC1G00: NAND SR latch and protection logic

Alexander Turström
Prodigy 60 points
Part Number: SN74LVC1G00
Other Parts Discussed in Thread: LM339, SN74LVC00A, SN74HCS00, SN74LVC1G10

Hello,

hoping to get some input on my design,

I want to latch some LM339 comparator output (active low)  for overcurrent and ground fault, and i wish to reset with an MCU.

Output enable is active low for buffer IC to pulldown 3.3v with 10k resistor.

  1.  does the uC reset scheme make sense? is it ok to pull down an MCU pin for a reset pulse into logic gate?
  2.  Is my final logic sound?

all nand gates have 100nF decoupling.

Cheers.