SN74LVC1G123: One shot model in pspice

user4090349

Intellectual 801 points

Part Number: SN74LVC1G123

Could you please provide a one shot model use application in pspice simulation.

I use the one shot / 74123 model in spice. And I could not see the effect.

Could you please provide an example?

Thanks!

5 months ago

0 Malcolm Lyn 5 months ago

TI__Mastermind 18080 points

Hi,

The model we provide for this device is an HSPICE model. You need some sort of HSPICE software to use it; it will not work in a PSPICE environment. Please see below as to why we haven't developed any PSPICE/behavioral models for our MMVs:

(13) [FAQ] Why is there no PSpice model for a Monostable Multivibrator device? - Logic forum - Logic - TI E2E support forums

Best,

Malcolm

0 user4090349 5 months ago in reply to Malcolm Lyn

Intellectual 801 points

What kind of HSPICE software you would suggest?

0 user4090349 5 months ago in reply to Malcolm Lyn

Intellectual 801 points

Also inside pspice software, a one_shot model do exist. Do you know how to connect it?

What does the pin R mean?

0 Malcolm Lyn 5 months ago in reply to user4090349

TI__Mastermind 18080 points

I've never used this one_shot model. I can try to use it tomorrow.

I have also unfortunately never used HSPICE so I can't recommend anything particular. From my knowledge it's quite expensive and is usually only used in military applications.

Best,

Malcolm

0 user4090349 5 months ago in reply to Malcolm Lyn

Intellectual 801 points

Hello Malcolm

Do you have some idea of using this model?

Thanks!

0 Albert Xu1 5 months ago in reply to user4090349

TI__Mastermind 23805 points

Hi,

In general we do not recommend using models for MMVs. they will not be accurate. You are better off doing your best to breadboard.