• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 572 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0104E-Q1: Needed IBIS model for SI simulation

Sathish Raja
Prodigy 235 points

Part Number: TXS0104E-Q1
Other Parts Discussed in Thread: TXS0101

Hi Team,

Needed IBIS model for SI simulation.

Kindly do send us ASAP.

Thanks and regards,
Sathish raja C

  • 0
    TI__Guru 59051 points

    Hey Sathish,

    Unfortunately we do not have the IBIS model configured for 4 ch, however you may see the 1 ch. (TXS0101) equivalent for similar behavior:

    scem527 (1).zip

    I would further recommend testing the device with the TXS-EVM for a more accurate representation of the device under your system conditions.

    Regards,

    Jack