Tool/software:
Hi Experts,
Good day!
I am looking for the recommended temperature derating for SN74LVC1G17MDCKREP. The customer is looking to use this info on their thermal analysis.
Thank you in advance.
Best regards,
Jonathan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi Experts,
Good day!
I am looking for the recommended temperature derating for SN74LVC1G17MDCKREP. The customer is looking to use this info on their thermal analysis.
Thank you in advance.
Best regards,
Jonathan
Hi Jonathan,
You can refer to this FAQ:
Instead of inputting max thermal values, you can input the temperatures you want to test at and create a curve based on those values.
Hello, what would be the recommended derated junction temperature for the device? Similar to the SD-18 derating guidelines, is there a recommendation from TI that would be different from the SD-18 that is less aggressive?
Hi Kayla,
Can you clarify a bit on what you are asking for? I have not had any experience with this before. My previous answer was gotten from the following app note start at the bottom of Pg3 "Derating Curves"
As for temp values Tjmax = 150C, Tamax = 125C, and ThetaJA = 252C/W