This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
Greetings...
We are planning to use TXB0108 in our application.
We would like to know whether the unused pins in Port A & Port B can be left open. Kindly provide your comments on the same.
Also, we would like to know whether OE pin can be pulled up to VCCA with a resistor i.e. <=10k ohms (Our application requires to keep the OE pin always enabled).
Kindly provide your comments on the same and please guide us in this regard.
Best Regards,
Ravichandran C
Hi Ravichandran,
The ports can be left floating. The states will be redriven by the internal buffer.
Yes, the OE pin can be pulled up through a resistor.
Best,
Julius Burtell