SN74HCS595: VIL and VIH

John Cooper

Part Number: SN74HCS595

Tool/software:

Hello,

If I am reading the datasheet correctly at VCC=2V it looks like to be sure a you have a high the signal needs to be at least 1.5V and to be sure you have a low the signal needs to be below .3V.

Is that correct?

Thanks,

John

3 months ago

0 Clemens Ladisch 3 months ago

Guru 277220 points

Correct.

0 John Cooper 3 months ago

Prodigy 80 points

So the Ibis model for this device shows that the VINL=.835V and VINH=1.1V with a VCC of 2.25V. So are those suppose to be typical values?

0 Malcolm Lyn 3 months ago in reply to John Cooper

TI__Mastermind 19200 points

Hi John,

Yes these files use typical/nominal values.

Best,

Malcolm

Logic

Logic forum

SN74HCS595: VIL and VIH