SN74AUP1G17: different tape-and-reel information

Yu-Chen

Part Number: SN74AUP1G17

Tool/software:

Team,

Customer found three different tape-and-reel information for SN74AUP1G17DCKR in the datasheet, vary in W1, A0, B0 and K0.
Can you help to confirm which should be the correct one? or how to refer?

Thanks.

3 months ago

+1 Clemens Ladisch 3 months ago

Guru 277650 points

There are several assembly sites for this device. All three can be correct. When you order, you cannot control the source.

+1 Malcolm Lyn 3 months ago

TI__Mastermind 19200 points

Hi Yu-Chen,

Clemens is correct, these dimensions vary slightly by assembly sites. Note that this only applies to their reel dimensions, all package dimensions are the same.

Best,

Malcolm

Logic

Logic forum

SN74AUP1G17: different tape-and-reel information