Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 26 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

SN74HCS126: Isolation

Allan Fan
Expert 6450 points
Part Number: SN74HCS126
Other Parts Discussed in Thread: TXU0202

Tool/software:

Hi expert,

Customer want to find a buffer for UART and also need feature to prevent leakage current from VDD_SYS_3V3(would always on) to VDD_NORMAL_3V3(may shutdown). Can SN74HCS126 3-state suitable for the need by disable EN? We are also considering TXU0202 cause it mentioned Vcc isolation and Vcc disconnect features. Please advise.

Thanks,

Allan

  • 0
    Guru 278800 points

    CMOS inputs and disabled outputs have a high impedance, so not current can leak.

    But note that the inputs of a powered device should always have a valid voltage; add pull-up or -down resistors to channels 1 and 2.