Tool/software:
Can DIR pin be controlled by CMOS 3V3 logic while VCCA voltage is 1V2 or 1V8?
as the datasheet only reference VCCA voltage for DIR in the recommended operation section.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Can DIR pin be controlled by CMOS 3V3 logic while VCCA voltage is 1V2 or 1V8?
as the datasheet only reference VCCA voltage for DIR in the recommended operation section.
Hello Mohamed,
Yes this should be fine. Also see this E2E post: SN74AVC1T45: DIR Pin Max High Level Input Voltage
Regards,
Josh