This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi team,
May I know if the OE Pin can be pulled up to 3.3 instead of 1.8V?
Thanks!
Jayden
Hi Jayden,
Yes, the OE pin of this device is overvoltage tolerant and can be biased to VCCB. Note that the logic thresholds (VIH/VIL) of the OE pin is still referenced to VCCA however.
[FAQ] Can the input voltage (Vi) to my logic device be higher than the supply voltage (Vcc)?
Regards,
Jack