• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 19 subscribers
  • Views 45 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TXS0102: TXS0102DCTR part marking

TXS0102: IBIS Simulation

Naizeng Wang
Expert 4930 points
Part Number: TXS0102
Other Parts Discussed in Thread: TXS0101

Tool/software:

Hi team, 

Cusotmer is simulating the signal chain with TXS0102. They found that they cannot simulate the whole chain. Thus, they can only simulate two separated chain, one is from master device to TXS0102, the other is from TXS0102 to slave device. Do we have IBIS model that can be simulated in the whole chain?

  • 0
    Guru 294720 points

    The TXS is a passive switch with edge accelerators; this cannot be described with an IBIS model. The TXS0101 has an IBIS file, but it models only the GND/VCC clamping diodes.

    The TXS works best with open-drain signals. In most applications, a buffered translators (e.g., from the TXU series) would be more appropriate.