• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 150 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TXS0108E: Max Data rate supported by TXS0108E

vin k
Prodigy 20 points
Part Number: TXS0108E

Tool/software:

Can we use TXS0108E for MIPI clock & Data signals voltage translation of 1.8V to 3.3V with data rate of 2Gbps?? If not, Can you suggest any alternate part.

  • 0
    TI__Mastermind 40656 points

    Hi Vin,

    TXS0108E will not be able to support higher then 110Mbps at this voltage corner. For speeds that high, you may need to look at differential ended signaling solutions or other high speed clock buffers. 

    Regards,

    Jack