TXS0102: Functional Safety FIT Rate, FMD and Pin FMA

Amit Doshi

Prodigy 160 points

Part Number: TXS0102

Tool/software:

Requesting the TXS0102DCUT Functional Safety FIT Rate, FMD and Pin FMA report.

4 months ago

0 Jack Guan 4 months ago

TI__Mastermind 40796 points

Hi Amit,

FuS documentation requires NDA restrictions and cannot be shared publicly. Please reach out to your TI representative or https://www.ti.com/info/customer-support.html to help coordinate the resources for this document.

Regards,

Jack

0 Amit Doshi 4 months ago in reply to Jack Guan

Prodigy 160 points

Is there a reason why? This document is publicly available for some of your other components. If that's the case I will reach out to CS.

0 Jack Guan 4 months ago in reply to Amit Doshi

TI__Mastermind 40796 points

Hi Amit,

The documentation requires NDA restrictions, please reach out to CS for this info, and we can provide the documentation there. Thank you for understanding.

Regards,

Jack

Logic

Logic forum

TXS0102: Functional Safety FIT Rate, FMD and Pin FMA