• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 20 subscribers
  • Views 431 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Using ULN2003A with TXS0108E

sanjay kumar
Prodigy 110 points
Other Parts Discussed in Thread: TXS0108E, ULN2003A

Dear All,

Can we use ULN2003A with TXS0108E.

I am using TXS0108E chip for converting 3.3V to 5V logic and , 5V input is given to ULN2003A

Thank you in advance,

 

Best Regards,

 

Sanjay Kumar S

  • 0
    TI__Mastermind 24975 points
    Hello Sanjay,

    You could use the TXS0108E to drive the inputs of the ULN2003A.
    The ULN2003A is also compatible with 3.3V inputs, however, and drive strength will not be significantly impacted for the ULN2003A whether the inputs are 3.3 or 5V, so a TXS0108E device is likely not required.

    Please note that we are trying to ensure that all posts are answered. With any new posts, we will be sure answer in a timely manner so that no posts go without a response. We will be closing this thread due to its age.

    Please feel free to post a new thread if you have additional questions, and we would be very happy to help.

    Best,
    Michael