• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 634 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Partial PowerDown Mode- Supply Current (IOFF)

Mahaboob Gadwal
Prodigy 10 points
Other Parts Discussed in Thread: TXS0101

Hi,

     I'm writing testplan for Voltage Leve Translator(TXS0101). Finding diffuculty in writing Test Conditions for IOFF during Partial PowerDown Mode ( VCCA=active VCCB-0V). If I make VCCB=0V, will it make my outputs (either A or B) to go to high impedance state, or should I pull OE pin to GND through Rpd to make it. Is the IOFF is the Current on active Supply pin (VCCA) or is it current on Output pin (either A or B). Please clarify..

 

Thanks & Regards,

Baig.