Hi,
, we are using the 74HC123 in our design. In that, we made all unused inputs A,B,CLR,Cx,CX/RX pins pulled to low. But in data sheet need to tie the unused inputs A,B,CLR to low or high and not specific anything abt CX,CX/RX pins.
We would like to know,whether this will create any functionality issue in any conditions.
As of now,74HC123 based design is working fine.
As of now, our design module is working more stable, so we are much worried to go for re-spin only for this.
Could you pls confirm this?
Thanks-Arumugam
