• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 19 subscribers
  • Views 372 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About the pull-up resistor of SN74LVC1T45

Satoshi
Guru 19645 points
Other Parts Discussed in Thread: SN74LVC1T45

When SN74LVC1T45 not used in both directions, is it satisfactory even if it connects Pull-UP to A-port and B-port?


* Since Pull-Up is built in IC of the output place, I would like to check.

Thank you for your consideration.