SN74AHC1G08 - Specification for the VIL

Luna

Intellectual 870 points

Other Parts Discussed in Thread: SN74AHC1G08, SN74AHC1G08-Q1

I have a question for SN74AHC1G08.

When VCC=2V, it is written with VIL=5.5V.

Is this spec correct ?

Sincerely yours,

over 11 years ago

0 ShreyasRao over 9 years ago

TI__Guru 62240 points

hi Sakuma-san,

I will be closing this post being dormant for long time . Please let us know if you need additional support .
I will note down the typo in the datasheet.

0 Luna over 9 years ago in reply to ShreyasRao

Intellectual 870 points

Dear Mr.ShreyasRao

Thank you for your reply.

I've used the spec written to the datasheet of SN74AHC1G08-Q1.

Please correct it.

Your Sincerely,

Sakuma

0 ShreyasRao over 9 years ago in reply to Luna

TI__Guru 62240 points

yes , that should work ,thanks sakuma-san.

Logic

Logic forum

SN74AHC1G08 - Specification for the VIL